Rexroth HCS02 Drive
CALL 479-422-0390 for ASSISTANCE
Rexroth HCS02 (IndraDrive C)
The HCS02 drive is part of the newest generation of Rexroth servo drives, combining an inverter and an integrated power source into a compact converter that can be used with additional inverters if necessary. These drives work with a range of Rexroth IndraDyn motors. So, for example, you might choose HCS02.1E-W0028-A-03-NNNN and MSK050C-0300-NN-S1-UG0-NNNN. Your particular choice will depend on the speed and torque requirements of your application, the degree of control needed, your preferred interface, and whether you need a single axis or a multi axis drive.
All HCS02 drives include impressive safety features that protect operators without the need for additional sensors. They can be used with basic open loop or closed loop functions, or you can use IndraMotion Motion Logic to extend functions to main spindle operation and advanced servo functions. Open interfaces allow international use.
A workhorse drive like this will rarely give you any trouble. If you need support for your HCS02, however, you should call us first.
Like all Rexroth servo drives, the HCS02 is not designed to be repaired on the machine. Rexroth’s modular design allows you to pull a faulty unit off the machine and replace it quickly to minimize costly downtime. We have the largest selection of emergency replacement units in the country, and a charter plane to get them to you fast. Once the faulty module is off the machine and you’re up and running again, factory repair will get your unit back to you in like-new condition.
Model Code Types
HCS02.1E-W0012-A-03-NNNN
HCS02.1E-W0070-A-03-NNNN
HCS02.1E-W0054-A-03-NNNN
HCS02.1E-W0028-A-03-NNNN
HCS02.1E-W0012-A-03-NNNV
HCS02.1E-W0028-A-03-NNNV
HCS02.1E-W0054-A-03-NNNV
HCS02.1E-W0070-A-03-NNNV
HCS02.1E-W0028-A-03-LNNN