F8000 is the Rexroth IndraDrive code for fatal hardware errors. Fatal errors are the ones that...
Rexroth DKC Servo Drive
CALL 479-422-0390 for ASSISTANCE
Indramat® (now Bosch Rexroth®) has been the world leader in motion control technology for three decades. Supporting your legacy and current products is our sole concern.
We have DKC Drives of every power rating — refurbished at the factory with original Rexroth parts — on the shelf and ready for immediate exchange. Remember, Rexroth parts are not available to any third party repair shop. The only way to get like-new drives is to buy factory refurbished drives.
Ecodrive Type 3
The Ecodrive Type 3 family was the upgrade to the Ecodrive Type 1. The firmware was moved to an external module (ESM Module) so that the firmware and parameter set from a failed drive could be moved to the replacement unit in seconds. Another significant improvement was the introduction of the modular I/O (BGR card). This allows a single spare drive power section with multiple I/O to be used as a spare instead of multiple drives.
There were also two additional power ranges added, the 100amp and 200amp units. The 230v unit was completely dropped from the lineup.
Ecodrive Type 1
Ecodrive Type 1 was a newer alternative to the DKS series of compact AC controllers. The Ecodrive series provided a economical solution for many applications. The units have internal firmware, and must be disassembled for any changes. They are purpose built, and not reconfigurable. The Ecodrive Type 1 was built in two voltages. Although they had only one power range, the 230v units were 30amp because of the reduced power available. This economical, versatile drive was very popular until it was replaced by the DKC Ecodrive Type 3.
Available DKC Type Codes