If you see error message F229 on your Rexroth Indramat drive, you've encountered a quadrant...
HMV Power Supply
CALL 479-422-0390 for ASSISTANCE
Rexroth HMV Power Supply
The HMV Power Supply module series is the current power supply for Rexroth’s IndraDrive system. As with earlier power supply modules, a single power supply unit can operate a number of drives with a single connection to the mains.
HMV Power Supply modules are designed to be used with IndraDrive M drive controllers. The power supply unit loops the 24 V control voltage of an external 24 V power supply through to the drive controllers and communicates with the drive controllers through a module bus.
HMV Power Supply units are extremely flexible, and come in both regenerative and non-regenerative versions. Regenerative units (those labeled “HMV01.1R” in the list below) feed generated power back to the mains, while the non-regenerative units (labelled “HMV01.1E”) do not.
The HMV Power Supply’s control panel is a separate unit attached to the power supply module, and this is where you’ll see error codes and other diagnostic information. If you are not sure how to respond to an error code, you should contact us immediately. for assistance.
The HMV Power Supply series includes the following units:
Contact us immediately if you need support for your HMV Power Supply units.