479-422-0390Call (479) 422-0390 for immediate assistance

Your Rexroth DKC Drive 0

Posted on 5, February 2018

in Category Blog


Your Rexroth DKC Drive/blog

Rexroth’s DKC drives were designed for economical automation in situations requiring a combination of power and precision. They were also known as Ecodrives, with “eco” standing for “economy.” They’re extremely reliable for single and multi axis control.

DKC drives use DriveTop software. The Ecodrive system consists of the DKC drive and a servo motor.

They’re still one of the most popular drives in the Rexroth legacy motion control line.

If you have one of these hardworking drives in service, you probably have never had a chance to do any troubleshooting. These drives are so reliable that you may not even know you have one around until  you have a problem.

When you need support for your DKC drive

Chances are good that you don’t have a manual for your DKC drive any more. If you have one, it’s probably in a sealed carton under other sealed cartons that nobody has opened in years.

Don’t waste time looking for it. Contact us and we will happily send you a copy of the manual you need.

The manual will list error codes, remind you of the requirements for your DKC drive, and provide safety information.

If you need further support for your DKC drive, call 479-422-0390 for immediate help. We can often provide support over the phone.

We also offer field support and emergency replacement units. DKC drives are designed so that you can easily remove a defective drive and replace it with a new one.

Call us for factory repair and reman, too. Since third party repair shops can’t access original parts for these drives, factory repair is the only practical option for service for your DKC drive. Reman gets your DKC drive back to you in like-new condition with a new warranty.

0 Comments